DWX-42W Wet Dental Mill (Roland)

From in-clinic to dedicated high-production labs, the DWX-42W is engineered to fit your milling needs.

he DGSHAPE DWX-42W enables wet milling of popular glass ceramic and composite resins with high precision and accuracy.

Millable material	Glass ceramics, Composite resin
Loadable workpiece shape	Width Maximum 1.57 in (40 mm) Depth Maximum 0.79 in (20 mm) Height Maximum 0.79 in (20 mm)
Operating speed	0.24 to 70.9 in./min. (6 to 1,800 mm/min.)
Spindle speed	15,000 to 60,000 rpm
Rotary axis travel angle	A axis ±360°
Number of burs housed	6
Attachable bur	Shank diameter 3 mm, dedicated milling bur
Compatible compressed air	Air Pressure 0.18 to 0.22 MPA Air Capacity 30gal (114L/min) or more Tank Capacity 8.7gal (33L) or more
Interface	USB, Ethernet (10 BASE-T/100 BASE-TX automatic switching)
Control command set	RML-1, NC code
Power requirements	AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 2.1 A
Power consumption	Approximately 190 W
Operating noise	During operation 70 dB(A) or less (when not cutting) During standby 48 dB(A) or less
External dimensions	Width x Depth x Height 19.0 x 22.0 x 23.6 in. (482 x 560 x 600 mm)
Weight	135 lbs. (61 kg)
Installation environment	Indoor use, Altitude Up to 6,562 ft. (2,000m) Temperature 41 to 82 °F (5 to 28°C) Humidity 35 to 80%RH (no condensation) Ambient pollution degree 2 (as specified by IEC 60664-1) Short-term temporary overvoltage 1,440 V Long-term temporary overvoltage 490 V
Included items	Power cord, USB cable, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, etc.

Request a Quote Now!